Range Rover Evoque (11-18) Front Control Arm Forward Bushings

Diagram Reference #1

102.99 102.99000000000001 USD


Add to Cart

These urethane performance bushings replace the stock rubber lower front bushings on the 2011-2018 Range Rover Evoque. Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn as the bushing deflects more than it should. You get sloppy steering, vibrations, and poor handling which makes the car feel unstable. These urethane bushings are stiffer than stock rubber and will not deflect as much. This helps keep the alignment in check with less variation. The car feels more planted and confidence-inspiring. And a limited lifetime warranty means you'll likely never have to pay for another bushing ever again.

Sold as a pair for the front of the lower control arm (see diagram). Replaces Range Rover part number BJ32-3063-AC.

Unlike other urethane bushings using only one or two urethane grades, Powerflex design engineers choose the correct hardness to allow for the specific movement or rigidity required for each component while minimizing unwanted NVH. Bushings are typically produced in one of three grades – Yellow (70-80A, approximately 25% stiffer than stock), Purple (80-90A, approximately 30% stiffer than stock), and Black (90-95A, approximately 80% stiffer than stock).

OE / OEM Cross Reference Numbers: BJ32-3063-AC
This parts fits the following models.

Ask A Question